Static Grounding

1) We make a series of Pipe grounding clamps which can be adjusted from 1” to 3”.

2) Equipotential connection for loading arms and pipes.

3) Can be produced to specific sizes.

Under certain conditions, a person’s body can be electrostatically charged by friction and natural environmental conditions. The “Personal Electrostatic Eliminating Alarm” device is designed to prevent the accumulation and accidental discharge of static electricity from a person's body.

Under certain conditions, a person’s body can be electrostatically charged by friction and natural environmental conditions. The “Personal Electrostatic Eliminating Alarm” device is designed to prevent the accumulation and accidental discharge of static electricity from a person's body.

Electrostatic Monitoring Eliminator (SD-A for short) is an electrostatic safety device designed to reduce electrostatic accidents and increase operational safety. It will detect electrostatic hazards in the specific area (such as the area around fuel dispensers in gas stations) and initiativly provides audible voice warning to ensure the safety of operation.

（1）The  Stainless steel clamp in coating and painting industries is ATEX approved.

（2）316L stainless steel construction with 3 stainless steel points, more durable and corrosion-resistant.

（3）The sensing clamp can be connected to an electronic apparatus together with a two-core cable.

(1)We make a series of Stainless Steel Hand Clamp with the size from 3/4"to 1 1/2".

(2)Can be produced to specific sizes.

Electrostatic Detector Operation Instruction 

1.To ensure accurate measurement, please release the static electricity of your body before measuring.

2.Press the power button to turn it on, and then press the Zero button to clear the screen data

3.Hold the meter from far to near 7cm away from the surface to be tested, you will get the figure soon , the unit is KV

4.After use, press the power button to shut down and place it properly.

Repeat steps 1 to 4 for each measurement

Only use a damp cloth to wipe

Power supply: 1 dedicated 9V alkaline battery

Do not disassemble or replace batteries in hazardous locations

Please replace the battery in time when the undervoltage flag(LOBAT) is displayed in the upper right corner of the screen. 

1) The grounding assemblies are ATEX approved.

2) There are many varieties and suitable for different situations of electrostatic grounding.

3) The SC-01 clamp is durable and the price is favorable.

4) The Earthing Clamp with retractable cable can be customized.

The accumulation of static charges during the fueling transfer process can lead to costly explosions, fire and personnel injury. The ‘Self-testing Grounding Clamp’ with visible & audible alarms is designed to dissipate static accumulation and verify proper grounding. Self Testing Static Grounding Clamp with Visual Indication is intrinsically safe for use in hazardous locations.

1) The grounding assemblies are ATEX approved.

2) There are many varieties and suitable for different situations of electrostatic grounding.

3) The Earthing Clamp with retractable cable can be customized.

The accumulation of static charges during the fueling transfer process can lead to costly explosions, fire and personnel injury. The Grounding Clamp to discharge static and verify proper grounding. Electrostatic ground connection system is intrinsically safe for use in hazardous locations.

The "Static Grounding Monitoring System" functions as a part of an Overfill Protection & Earthing System. These provide a visual green light indicating a confirmed grounding condition of road tanker vehicles during the transfer of flammable and combustible materials. A red light indicates the absence of dependable grounding. An interlock circuit inside the control panel will prevent pumps and equipment from starting until a satisfactory ground is established. The interlock circuit will also shut off pumps and equipment if the ground is lost during the pumping operation.

（1）The GND-REB-2960 Grounding Clamps are ATEX approved.

（2）Die-cast aluminum construction with 2 stainless steel points.

（3）Strong spring pressure allows the Static grounding clamp to penetrate multiple layers of paint or corrosion build-up, so that the proper contact is made.

（1）ATEX approved Static earthing &bonding clamp with 2 tips are ATEX approved .

（2）Die-cast aluminum construction with 2 stainless steel points.

（3）Static grounding &bonding clamp can be connected to an electronic apparatus together with a two-core cable.

（1）The electrostatic grounding clamps are ATEX approved .

（2）Die-cast aluminum construction with 3 stainless steel points.

（3）The sensing clamp can be connected to an electronic apparatus together with a two-core cable.

（1）Aircraft Grounding Clamp is ATEX approved .

（2）Die-cast aluminum construction with brass jaws.

（3）Brass jaws are designed to allow proper contact onto unpainted surfaces, posts or thin materials.

（1）ATEX approved SS316L Static Grounding clamps are ATEX approved .

（2）316L stainless steel construction with 3 stainless steel points, more durable and corrosion-resistant.

（3）The stainless steel earth clamp can be connected to an electronic apparatus together with a two-core cable.

The accumulation of static charges during the fueling transfer process can lead to costly explosions, fire and personnel injury. The ‘Self-testing Grounding Clamp’ with visible & audible alarms is designed to dissipate static accumulation and verify proper grounding. STATIC PROTECTION CLAMP THROUGH BONDING AND GROUNDING is intrinsically safe for use in hazardous locations.

Socket and grounding bolt are designed to connect the Overfill Protection & Earthing Systems to the tank truck

Socket and grounding bolt are designed to connect the Overfill Protection & Earthing Systems to the tank truck.

The ATEX approved "Static Grounding Reels" have a self-retracting cable drum and an instant locking mechanism to prevent the cable from becoming tangled. The Standard S-RL model includes a 7m (23ft.) polyurethane jacketed stainless steel cable. An ATEX approved, heavy duty grounding clamp (with replaceable stainless steel tips) is connected to the cable for a solid connection to the grounding surface. S-RL Reels are also available with 15m (49ft.) and 20m (65ft.) cable lengths.